HP ProLiant Gen8 Handbuch Seite 143

●
"The Smart Array firmware is reporting that the redundant I/O modules
of this box are not cabled for good fault tolerance"
●
"The Smart Array firmware is reporting that the redundant I/O modules
of this box have multiple paths to the controller"
Meldungs-ID: 24618
Schweregrad: Warnung
Protokollmeldung: Array controller <controller name / slot information> is
reporting that an unsupported configuration has occurred with the
redundant cabling that is attached to port <port number>. Please check
the cabling and ensure that a supported configuration is being used.
Meldungs-ID: 24619
Schweregrad: Informativ
Protokollmeldung: Fan number <fan number> in box <box number> was <inserted /
removed>. Box <box number> is attached to port <port number> of array
controller <controller name / slot information>.
Meldungs-ID: 24620
Schweregrad: Informativ
Protokollmeldung: Fan number <fan number> located on fan module <fan module
number> in box <box number> was <inserted / removed>. Box <box number> is
attached to port <port number> of array controller <controller name /
slot information>.
Meldungs-ID: 24621
Schweregrad: Fehler
Protokollmeldung: Fan number <fan number> is reporting a failure. This fan is
located in box number <box number> which is connected to port <port
number> of array controller <controller name / slot information>. The
controller may attempt to shut down the power to the storage device and/
or spin down the installed disk drive(s).
Meldungs-ID: 24622
Schweregrad: Fehler
Protokollmeldung: Fan number <fan number> located on fan module <fan module
number> is reporting a failure. This fan is located in box number <box
number> which is connected to port <port number> of array controller
<controller name / slot information>. The controller may attempt to shut
down the power to the storage device and/or spin down the installed disk
drive(s).
Meldungs-ID: 24623
Schweregrad: Informativ
Protokollmeldung: Fan number <fan number> is reporting a degraded condition.
This fan is located in box number <box number> which is connected to port
<port number> of array controller <controller name / slot information>.
Meldungs-ID: 24624
DEWW Smart Array-Meldungen im Windows-Ereignisprotokoll 119