HP ProLiant Gen8 Handbuch Seite 142
Vorschau ausblenden
Andere Handbücher für ProLiant Gen8:
- Fehlerbeseitigungshandbuch (134 Seiten) ,
- Benutzerhandbuch (101 Seiten) ,
- Bedienungsanleitung (26 Seiten)
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Protokollmeldung: Array controller <controller name / slot information> has
reported that the external array controller attached to port <port
number> has been disconnected or powered down.
Meldungs-ID: 24615
Schweregrad: Informativ
Protokollmeldung: Array controller <controller name / slot information> has
reported that an external array controller was attached to port <port
number> or was previously attached and was powered on.
Meldungs-ID: 24616
Schweregrad: Warnung
Protokollmeldung: Array controller <controller name / slot information> is
reporting that an unsupported configuration has occurred with the
redundant cabling that is attached between port <port number> and box
<box number>. <firmware information>. Please check the cabling and ensure
that a supported configuration is being used.
<firmware information>-Werte:
●
"The Smart Array firmware is reporting that no additional details are
available"
●
"The Smart Array firmware is reporting that the redundant cabling
configuration on the controller has a mix of storage boxes with and
without redundant I/O modules"
●
"The Smart Array firmware is reporting that a redundant I/O paths
exist due to direct loopback of the controller ports"
●
"The Smart Array firmware is reporting that the redundant I/O modules
of this box are not cabled for good fault tolerance"
●
"The Smart Array firmware is reporting that the redundant I/O modules
of this box have multiple paths to the controller"
Meldungs-ID: 24617
Schweregrad: Warnung
Protokollmeldung: Array controller <controller name / slot information> is
reporting that an unsupported configuration has occurred with the
redundant cabling that is attached to port <port number>. <firmware
information>. Please check the cabling and ensure that a supported
configuration is being used.
<firmware information>-Werte:
●
"The Smart Array firmware is reporting that no additional details are
available"
●
"The Smart Array firmware is reporting that the redundant cabling
configuration on the controller has a mix of storage boxes with and
without redundant I/O modules"
●
"The Smart Array firmware is reporting that a redundant I/O paths
exist due to direct loopback of the controller ports"
118 Kapitel 3 HP Smart Array-Fehler
DEWW
Werbung
Kapitel
Fehlerbehebung
