HP ProLiant Gen8 Handbuch Seite 133

<controller name / slot information>. The array controller may attempt to
shut down power to the attached box and/or spin down the installed disk
drive(s).
Meldungs-ID: 24589
Schweregrad: Warnung
Protokollmeldung: Sensor number <sensor number> has reported that the
internal temperature is nearing the preset temperature limit. This sensor
is located in box <box number> which is connected to port <port number>
of array controller <controller name / slot information>. The array
controller may enact precautionary measures to prevent data loss should
the temperature reach the operating limit.
Meldungs-ID: 24590
Schweregrad: Informativ
Protokollmeldung: Sensor number <sensor number> has reported that a previously
existing temperature condition has been corrected. This sensor is located
in box <box number> which is connected to port <port number> of array
controller <controller name / slot information>. All of the temperature
sensors in the attached box are now reporting acceptable temperature
levels.
Meldungs-ID: 24591
Schweregrad: Warnung
Protokollmeldung: Redundant power supply number <power supply number> has
reported a fault. This power supply is located in box <box number> which
is connected to port <port number> of array controller <controller name /
slot information>.
Meldungs-ID: 24592
Schweregrad: Informativ
Protokollmeldung: Redundant power supply number <power supply number> is no
longer sensed as being in a failed state. Some possible reasons that
would cause this state change to occur include:
1. The previously failed power supply has returned to an operational
state.
2. The previously failed power supply was removed from the chassis.
The power supply state change occurred in box <box number> which is
connected to port <port number> of array controller <controller name /
slot information>.
Meldungs-ID: 24593
Schweregrad: Informativ
Protokollmeldung: Array controller <controller name / slot information> has
reported that more physical devices were detected than the controller is
currently capable of supporting. Some physical drives will not be
accessible.
Meldungs-ID: 24594
DEWW Smart Array-Meldungen im Windows-Ereignisprotokoll 109