HP ProLiant Gen8 Handbuch Seite 161

The external Smart Array controller is attached to the host side Smart
Array controller <controller name / slot information>.
<previous status>- und <current status>-Werte:
●
"OK"
●
"FAILED"
●
"NOT CONFIGURED"
●
"INTERIM RECOVERY MODE"
●
"READY FOR RECOVERY"
●
"RECOVERING"
●
"WRONG PHYSICAL DRIVE REPLACED"
●
"PHYSICAL DRIVE NOT PROPERLY CONNECTED"
●
"HARDWARE IS OVERHEATING"
●
"HARDWARE HAS OVERHEATED"
●
"EXPANDING"
●
"NOT YET AVAILABLE"
●
"QUEUED FOR EXPANSION"
●
"DISABLED DUE TO SCSI ID CONFLICT"
●
"EJECTED"
●
"ERASING"
●
"UNKNOWN"
Meldungs-ID: 24712
Schweregrad: Fehler
Protokollmeldung:
The external Smart Array controller located in the MSA chassis labeled as
<chassis label> has reported that logical drive <logical drive number>
has encountered a status change from:
Status: <current status>
to
Status: <previous status>
The external Smart Array controller is attached to the host side Smart
Array controller <controller name / slot information>.
<previous status>- und <current status>-Werte:
●
"OK"
●
"FAILED"
●
"NOT CONFIGURED"
DEWW Smart Array-Meldungen im Windows-Ereignisprotokoll 137