Instant Pot DUO EVO PLUS Bedienungsanleitung Seite 54

Troubleshooting
Register your product today.
Contact Customer Care:
+44 (0) 3331 230051
support@instantpot.co.uk
@instantpotuk
Problem
Sealing ring not properly fitted
Difficulty Float valve in the popped-up position
closing lid
Contents in cooker are still hot
Pressure inside the cooker
Difficulty
Float valve stuck at the popped-up
opening lid
position due to food debris or residue
Inner pot is
stuck to lid Cooling of inner pot may create suction,
when cooker causing inner pot to adhere to the lid
is opened
No sealing ring in lid
Sealing ring damaged or not properly
installed
Food debris attached to sealing ring
Steam leaks
Lid not closed properly
from side
of lid
Sealing ring rack is warped or off-centre
Inner pot rim may be misshapen
54
Possible Reason
Contents may be under pressure; to avoid scalding injury, do not
DANGER
attempt to force lid open.
Solution
Re-position sealing ring, ensure it is snug
behind sealing ring rack.
Gently press the float valve downward
with a long utensil.
Move quick release switch into Vent
position, then lower lid onto cooker
base slowly, allowing heat to dissipate.
Release pressure according to recipe;
only open lid after float valve has dropped
down.
Ensure steam is completely released by
quick-releasing pressure, then press float
valve gently with a long utensil.
Open lid carefully and thoroughly clean
float valve, surrounding area, and lid before
next use.
To release the vacuum, move quick release
switch into Vent position.
Fit sealing ring.
Replace sealing ring.
Remove sealing ring and clean thoroughly.
Open, then close lid.
Remove sealing ring from lid, check sealing
ring rack for bends or warps. Contact
Customer Care.
Check for deformation and contact
Customer Care.