VHF R5 Originalbetriebsanleitung Seite 25

R5 – Installing the machine
3. Ensure that you have administrator rights on the
CAM computer.
4. Install DENTALCAM & DENTALCNC.
During installation, the SX Virtual Link setup
program opens.
F . 20 T
IG HE FIRST VIEW OF THE
5. If the SX Virtual Link setup program did open,
continue with the next step.
If the SX Virtual Link setup program did not open,
open the installation program in the DENTALCAM
& DENTALCNC installation folder.
USB\Silex\Cosetup.exe
6. Follow the SX Virtual Link setup program until the
installation is finished.
7. Continue with the DENTALCAM & DENTALCNC
installation.
SX V L
IRTUAL INK SETUP PROGRAM
Original Operating Instructions: R5
Version: 12/16/2021
EN 25