Cleaning The View Window; Cleaning The Multi-Purpose Compartment - VHF R5 Originalbetriebsanleitung

R5 – Maintenance and do-it-yourself
8.7 Cleaning the view w indow
To easily clean the view window to the working
chamber, you can fold the working chamber door
upwards.
1. Have ready:
A wet cloth
n
A mild cleaning agent (optional)
n
2. Open the working chamber door.
3. Grab the working chamber door at the middle of
the lower edge and fold it upwards.
F . 77 F
IG OLDING THE WORKING CHAMBER DOOR UPWARDS
4. Clean the inside of the view window with a wet
cloth. If necessary, use a mild cleaning agent.
F
IG
5. Grab the working chamber door in the middle of
6. Close the working chamber door.
7. If DENTALCNC displays a message that you need to
8. If necessary, clean the outside of the view window
8.8 Cleaning the multi-purpose
compartment
Cleaning the multi-purpose compartment is important
because otherwise machining debris will damage sens-
itive machine parts.
1. Open the multi-purpose compartment.
2. Remove all items from the blank magazine.
3. Clean the blank magazine. Clean the clamping
4. Remove the cooling liquid tank.
5. Clean all surfaces in the multi-purpose com-
Original Operating Instructions: R5
Version: 12/16/2021
. 78 T (
HE VIEW WINDOW MARKED ORANGE
the bottom edge and fold it downwards.
The working chamber door is locked in place.
fold down the working chamber door, the door is
not completely fold down. Repeat steps 5 and 6.
with a wet cloth. If necessary, use a mild cleaning
agent.
levers very thoroughly.
partment.
EN 57
)