What To Do When Devices Are In Use In Sx Virtual Link; What To Do If The Machine Is Unreachable; Network Configuration Via The Machine's Web Server; Resetting The Network Configuration To Factory Defaults - VHF R5 Originalbetriebsanleitung

R5 – Installing the machine
Useful things to know about the network
configuration
While the network connection to your machine should
work automatically, there are some useful things that
you or your IT specialist should know.
5.8.1 What to do w hen devices are in use in
SX Virtual Link
If SX Virtual Link displays that 1 or more devices are in
use, another computer running SX Virtual Link has
taken control of them.
F . 30 D
IG EVICES THAT ARE IN USE BY OTHER COMPUTERS
1. "In use" icon
2. Name of the computer that is using the device
You can send a use request to the computer that is
currently connected to the device. If the request is
accepted, your computer can connect to the device.
1. In the SX Virtual Link application window, right-
click on the corresponding device.
2. From the context menu, select Use request.
The request displays in a pop up window on the
receiving computer. If the request is accepted, your
computer will connect to the device after a short
amount of time.
5.8.2 What to do if the machine is unreach-
able
If the network settings that are saved in the machine
are incorrect, your IT specialist may try the following to
connect to the machine:
1. Access the router to which the machine is con-
nected.
2. Determine the IP address of the machine via the
router's configuration menu.
3. Configure the machine's network settings via the
web server (see below).
4. If this is not possible, ask customer service to reset
the machine's network settings through hardware
access.
5.8.3 Netw ork configuration via the
machine's w eb server
The machine features a web server which allows for
network configuration and network diagnostics.
You can access the web server as follows:
1. Ensure that SX Virtual Link is connected to your
2. In the SX Virtual Link application window, right-
3. From the context menu, select Display the Web Page.
4. Enter the password and press <E
5.8.4 Resetting the netw ork configuration to
factory defaults
In case of network problems, you can try resetting the
machine's network configuration to default settings.
1. If you still have access to the machine's web server,
2. If you do not have access to the web server, contact
Original Operating Instructions: R5
Version: 12/16/2021
machine.
click on the entry for the desired machine. If
required, use the Ethernet address to identify the
machine.
F . 31 T E
IG HE THERNET ADDRESS OF THE MACHINE
)
ORANGE
The default web browser launches and auto-
matically connects to the machine's web server.
You are prompted to enter a password.
set a custom password, just press <E
The start page of the web server displays.
After the reset, you will have to reconfigure the
machine's network settings.
do as follows:
a. Log in to the web server.
b. In the left column, select Settings Initialization
from the Maintenance section.
c. Select [Yes] twice.
d. Wait 30 seconds.
e. Restart the machine.
customer service.
EN 29
(
MARKED
>. If you never
NTER
>.
NTER