General; Scope Of Guarantee; Operating Instructions; Transportation Damage - ECOLAB Lub-O-Mat 2,5 Betriebsanleitung

1.

General

This operating manual contains all the instructions for the installation and start-up of the
metering station
The safety instructions and points marked as requiring special care must be observed
at all times!
NOTE
1.1

Scope of guarantee

The manufacturer is able to accept guarantee liability with respect to operational safety and
reliability, dependability and performance of the
conditions:
CAUTION
NOTE
In addition, the general warranty and service conditions of the company
ECOLAB Engineering GmbH
1.2

Operating instructions

ATTENTION
Instruction manuals supplied for the installed components:
Component
Short description E60
CD Operating Instructions for E60 (optional)
Oval Gear meter OGM
Should you require any of the instruction manuals mentioned above, they are available to
download free of charge from the "DOWNLOAD" area of http://www.ecolab-engineering.de.
NOTE
If you do not have Internet access or cannot find the manual you require online, please
contact the manufacturer (see chapter 1.5).
1.3

Transportation damage

If damage is discovered to any of the components of the
unit must not be installed.
417101637_Lub-O-Mat
Lub-O-Mat for conveyor track lubrication.
The German chapters of this manual constitute the ORIGINAL OPERATING MANUAL
and take legal precedence.
All other languages are translations of the ORIGINAL OPERATING MANUAL.
The installation, commissioning, operation and maintenance work must be performed by
authorised skilled personnel (requirement within the Federal Republic of Germany: with
expert knowledge pursuant to the accident prevent regulations on the "chlorination of
water").
The unit must be used exclusively in compliance with the contents of all the instruction
manuals, as described in chapter 1.2.
Only genuine spare parts must be used for repairs.
Warranties can only be provided for the functioning of the
products are used.
are applicable.
The owner and the operating personnel must have read and understood the instruction
manual for the Lub-O-Mat
In addition to this manual, the metering station for the conveyor track lubrication system
will also come with further instruction manuals for the installed components.
All the instruction manuals supplied are essential for ensuring the smooth operation of
the Lub-O-Mat and form the basis for all servicing work!
PLUS
(optional)
Lub-O-Mat
(Art. No. 4171333).
Lub-O-Mat
- 26 -
only under the following
Lub-O-Mat if genuine
Article No.
417101775
417101793
417101779
when it is unpacked, the
Rev. 03-07.12
ECOLAB