Herunterladen Inhalt Inhalt Diese Seite drucken

Icom IC-7600 Bedienungsanleitung Seite 173

Inhaltsverzeichnis

Werbung

Befehl Sub-Befehl
Daten
1C
00
00
Send/read transceiver's status (RX)
When „CI-V Output (for ANT)" (Command:
1C 04) is set to „ON", automatically outputs
when changed.
01
Send/read transceiver's status (TX)
When „CI-V Output (for ANT)" (Command:
1C 04) is set to „ON", automatically outputs
when changed.
01
00
Antenna tuner OFF (through)
01
Antenna tuner ON
02
Tuning
02
00
Send/read transmit frequency monitor
setting
OFF
01
Send/read transmit frequency monitor
setting
ON
03
s. S. 165 Read transmit frequency
When „CI-V Output (for ANT)" (Command:
1C 04) is set to „ON", automatically outputs
when changed.
04
00
Send/read command to disable to output
the antenna controller status (frequency and
so on) from [REMOTE].
01
Send/read command to enable to output the
antenna controller status (frequency and so
on) from [REMOTE].
1E
00
Read number of available TX frequency
band
01
s. S. 167 Read TX band edge frequencies
02
Read number of user-set TX frequency band
03
s. S. 167 Send/read user-set TX band edge frequen-
cies
21
00
s. S. 167 Send/read RIT frequency
01
00
Send/read RIT setting is OFF
01
Send/read RIT setting is ON
02
00
Send/read ∂TX setting is OFF
01
Send/read ∂TX setting is ON
25
s. S. 167 Send/read the Main or Sub band frequency
26
s. S. 167 Send/read the selected operating mode and
filter
Beschreibung
12
STEUERBEFEHLE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
164

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis