Optional 3M™ Attest™ Connect Auto-Reader Application; Getting Started - 3M Attest Mini Auto-reader 490M Benutzerhandbuch

OPTIONAL 3M™ ATTEST™ CONNECT AUTO‑READER APPLICATION
Use of 3M™ Attest™ Connect provides additional functionality as described in the
Features section of this manual�
Personal Computer (PC) Requirements
3M™ Attest™ Connect is designed to be used with PCs with internet access running
either the Windows 7 or Windows 10 operating systems� The 3M™ Attest™ Connect
application will run in the first supported language specified in the PC's language
settings� For best results, a minimum PC display resolution of 1440 X 900 is
recommended�

Getting Started

Open a web browser on the PC and navigate to Go.3M.com/490M� Click on the
REGISTER PRODUCT button to begin the registration process� When prompted,
click on the Download Attest Connect for Windows button�
HOME PAGE
As depicted below, when the 3M™ Attest™ Auto-reader 490M is connected to the PC, the Home page provides a real-time, virtual image of the Auto-reader along with other
information and functionality�
1� Incubating BIs� BIs are depicted as type 'unknown' until the BI Type and Control
status are specified by the user on the BI Details page� Navigate to the BI Details
page for a specific BI by clicking on the BI image when either the remaining
minutes of incubation or result is displayed�
2� Click the virtual button to stop Display flashing and silence the audible alarm (if
enabled)� A diagonal line through the speaker image indicates the audible alarm
has been disabled�
3� Click to minimize the application�
4� Click to close the application�
10
Double click on the Setup3MAttestConnect.exe file and follow the prompts on the
screen to review and accept the End User License Agreement (EULA) and install
3M™ Attest™ Connect� 3M™ Attest™ Connect will automatically start�
Next, connect a 3M™ Attest™ Mini Auto-reader 490M to the PC using the
supplied USB cable� The first time an Auto-reader is connected, you will be
presented with a "Sign In" form� Sign in using the same email address that was
entered in the registration process� The sign in process links the installation of
3M™ Attest™ Connect on your PC with the registration information created in the
registration website�
Once the sign in form completes, the Home page will appear on the PC screen�
3M™ Attest™ Connect has four main pages: Home, History, Settings, and BI Details�
Click to navigate to the History page�
5�
6� Click to navigate to the Settings page�
7� Auto-reader model #
8� Auto-reader firmware version
9� Auto-reader serial number
10� Any BI results, remaining incubation time, or caution/
error codes appearing on the Auto-reader Display are
shown in this row� Click on caution/error codes for an
explanation of the problem and solution�