Setting Operation Mode / Current / User Defined; Display In The Operating Display; Configuration; Overview - ECOLAB Elados EMP IV E60 serie Betriebsanleitung

10.2.4.1.1 Setting operation mode / current / user defined

NOTE
Fig. 10.12 Operation mode / current / user defined
10.2.4.2

Display in the operating display

Display
10.3

Configuration

10.3.1

Overview

10.3.2

"Scrolling the display"

Fig. 10.15 Scrolling display
417101799_EMP_IV_E60.docx
The difference in the set values must be greater than or equal to 5. (e.g. min 10 max 15).
Pos. Description
1 Range of input signal, preset in the menu
2 Actual applied current value
3 Stroke frequency in %
Fig. 10.13 Display in the operating display
The display possesses a "scroll function", i.e. some menu items are only
shown on the display when the end of the menu is reached on the
display. Using the symbols ▲ (pos. 1) or ▼ (pos. 2) on the display, you
can see which direction you can scroll in.
pos. 1 = (▲)scroll the display upwards
pos. 2 = (▼)scroll the display downwards
Fig. 10.14 Configuration / Overview
Configuration of:
➢ Menu language
➢ Units
➢ Code entry
➢ Startup settings
➢ Metering lock
➢ Low-level contact
➢ Alarm output
➢ Pulse memory
➢ Oval gear meter
➢ Metering controller
➢ Metering monitoring
➢ Batch
- 97 -
see chapter:
10.3.3
10.3.4
10.3.5
10.3.6
10.3.7
10.3.8
10.3.9
10.3.10
10.3.11
10.3.12
10.3.13
10.3.14
Rev. 11-10.19