7.
Operation
7.1
Operating Display during Degassing Function
fig. 7.1
After the preset number of strokes of the degassing control has been processed, the pump
resumes working in standard mode.
7.2
Cancelling Degassing
Degassing can be cancelled as follows:
•
by pressing the Start/Stop key
•
by issuing an empty signal
or
•
by activating the metering lock
7.3
Operating Display in Ext. Multiplication Mode with Active Degassing Function
fig. 7.2
417101377_DegasPlus
Pos.
Designation
1
DEGAS mode
2
Numbers of DEGAS strokes
3
Symbol for strokes
During the degassing interval controlled by the DEGAS
system control, the display depicts "Degas." The numbers of
strokes to be processed is displayed and counted down.
Pos.
Designation
1
Multiplication mode of the pump is running
2
Multiplication factor
3
Display of time left until start of the next degassing
If one stroke is executed before the expiration of the degas
break time, the degas break time is reset automatically to the
parameter preset in the configuration menu.
PLUS
Rev. 4-12.14