Selecting; Display In The Operating Display/ Setting - ECOLAB Elados EMP IV E60 serie Betriebsanleitung

10.2.3.1

Selecting

10.2.3.2

Display in the operating display/ Setting

The multiplication and division factors are configured/adjusted in the operating display. This
can take place while the pump is operating.
Fig 10.9 Multiplikation
Fig. 10.10 Division
417101799_EMP_IV_E60.docx
Multiplikation
Division
Fig. 10.8
NOTE
- 95 -
Operation mode / pulse / selecting
If the newly set value is not
confirmed within 10
seconds by pressing the
START/STOP key, the
system reverts to the
previously set running
value.
Rev. 11-10.19