Connecting The Vacuum Tube - Hologic Aquilex Fluid Control System Gebrauchsanweisung

OBJ_BUCH-0000000505-010.book Seite 20 Freitag, 8. Juni 2018 12:28 12
System Operation
Medi-Vac Flex Advan-
tage 3000 cc
en
Fig. 5-5 Low vacuum tube
(1) Connection for low vacuum
(white)
Hygiene filter
(2)
Vacuum tube
(3)
container
(4)
Connecting tube
(5)
20
NOTE!
Ensure containers are positioned properly in the respective holders.
NOTE!
Only use containers with overflow protection.
5.3.2

Connecting the Vacuum Tube

CAUTION!
When using the Aquilex System with tissue removal systems, e.g. MyoSure®, the
combination of low set pressures and excessive vacuum pressures may result in
a significant loss of intrauterine distension pressure which has the potential to
affect the visibility of the surgical field. Conversely, when employing a high dis-
tension pressure, the deactivation of the tissue removal system can lead to pres-
sure spikes that can exceed 150 mmHg.
Connect vacuum tube with hygiene filter to suction containers. The vacuum tube
with hygiene filter must be replaced when dirty and after 30 days at the latest.
The vacuum tube with hygiene filter should not be cleaned.
• Connection for low vacuum (white)
· Connect vacuum tube with white connector to low vacuum port (white) (1)
Fig. 5-5. This vacuum pump has a fixed vacuum pressure (~ 225 mmHg).
· Use the connecting tube ((5) Fig. 5-5) when two containers are serially con-
nected to the same vacuum port.
Aqu ilex
TM Fluid
Ser. Nr. WOM Con trol
Syst
(1) 100- 240 V em
YYY / 50-6 /
Y-MM 0 Hz
Manu factur
W.O.M . WORL er
10587 ( Berlin D OF
96337 +49 (0) 30 • Salzuf MEDIC er 8 INE
GERM Ludwi 399 gsstad 81-55 • GERM AG
ANY • ( t • Alte 0 ANY
+49 (0) 9263 Postst raße
877-0 11
(2)
(3)
(5)
(4)