Rating Plate - Eisemann BSKA V2 RSS Betriebsanleitung

3.4

Rating plate

The rating plate next to the carrying handle serves to uniquely identify your genset and
informs you about the following features:
Information
Manufacturer
Machine
Type / Item number
Serial number
Engine number
Construction year
Important technical data:
Rated voltage [V]
Rated frequency [Hz]
Rated speed [1/min]
Rated current [A]
Rated power factor
Rated power [kVA]
ISO class
Protection type
Sound power level L
Mass [kg]
The following image shows the rating plate of your genset:
80
904217 – 2018-11
Brief description
Indicates name, address, trademark and authorised
representative of the manufacturer.
Indicates the name of the device class the genset is assigned to.
Indicates the product name for technical identification of the
genset.
Indicates the sequential number for clear identification of your
genset.
Indicates the sequential number for clear identification of the
engine of your genset.
Indicates the year in which the production of your genset was
completed.
Indicates the rated voltage in volts.
Indicates the rated frequency in hertz.
Indicates the rated speed in revolutions per minute.
Indicates the current that can be generated in amperes.
Indicates the rated power factor cos φ in percent.
Indicates the power class in kilovolt amperes (according to ISO
8528-1:2005).
Indicates the insulation class according to DIN EN 60085.
Indicates the scope of protection against the ingress of dust and
water in accordance with DIN EN 60529 for the entire unit.
[dB(A)] Indicates the value of the guaranteed
WA
(according to directive 2000/14/EC) in decibels.
Indicates the total weight of the genset in kilograms (as-delivered
state).
sound power level
Subject to change.