Diagnose Mit Profinet - Siemens SINAMICS G120 Handbuch

Kommunikation über PROFIBUS und PROFINET
3.1 PROFIdrive-Profil
3.1.3.1

Diagnose mit PROFINET

PROFINET verwendet zur Übertragung der PROFIdrive-Meldungsklassen die
Kanaldiagnose (Channel Diagnosis).
9000 hex Hardware / software error
9001 hex Network fault
9002 hex Supply voltage fault
9003 hex DC link overvoltage
9004 hex Power electronics faulted
9005 hex Overtemperature of the electronic com-
ponents
9006 hex Ground fault / inter-phase short circuit
9007 hex Motor overload
9008 hex Communication error to the higher-level
control system
9009 hex Safety monitoring channel has identified
an error
Bild 3-8 Struktur der Kanaldiagnose
46
900A hex Position/speed actual value incorrect or not available
900B hex Internal (DRIVE-CLiQ) communication error
900C hex Infeed faulted
900D hex Braking module faulted
900E hex Line filter faulted
900F hex External measured value / signal state outside the
permissible range
9010 hex Application / technological function faulted
9011 hex Error in the parameterization / configuration
/commissioning procedure
9012 hex General drive fault
9013 hex Auxiliary unit faulted
Funktionshandbuch, 01/2016, FW V4.7 SP6, A5E34229197A AC
Feldbusse