Technical Data - Truma Trumatic E 4000 Gebrauchsanweisung

If the pressure regulator is
exposed to weather condi-
tions – especially on trucks
– always make sure to
protect the regulator using
the Truma protective cover
(standard accessory in truck
attachment kit).

Technical data

determined in accordance
with EN 624 or Truma test
conditions
Type of gas: Liquid gas
(propane/butane)
Operating pressure:
30 mbar
(refer to data plate)
Rated thermal output:
3700 W
Gas consumption:
150 / 310 g/h
Air flow rate:
3
approx. 70 / 102 m /h
Current input at 12 V:
1.0 / 2.3 A
Current input at 24 V:
0.6 / 1.06 A
Standby:
0.01 A
Weight:
approx. 10 kg
Declaration of conformity:
The Trumatic E 4000 (A) has
been tested by the DVGW and
complies with the gas equip-
ment directive (90/396/EEC)
and the other applicable EC
directives. The following CE
Product Ident. No. is available
for EU countries:
CE-0085AP0232.
The heater complies with
heating equipment directive
2001/56/EC with supplement
2004/78/EC and bears the
type approval numbers:
e1 00 0145.
The heater complies with
vehicle engine interference
suppression directive
72/245/EEC with supple-
ments 2004/104/EC and
2005/83/EC, and bears
type approval number:
e1 03 2605.
The heater complies with
EMC directive 89/336/EEC
and low voltage directive
72/23/EEC.
General design approval
of the federal office for
motor vehicles:
S 139
The right to effect technical
modifications is reserved!
11