Setting The Remote Control; A) Selecting Model Memory - Reely 23 15 52 Bedienungsanleitung



11. Setting the Remote Control

Even if your remote control is factory preset for your model, you should check and/ correct and optimize
the steering responses of the model. Because only a perfectly adjusted model to the respective driver
offers you maximum driving fun.
For this purpose, the remote control is provided with a programming menu which is easy to operate and
with the help of which all necessary settings on your model can be carried out.

a) Selecting model memory

Your remote control system is provided with 10 different model memories overall in which you can save
the individual setting values for 10 different models. Alternatively, you can also set different values for
one model and safe them each respectively.
If you wish to select the model memory, proceed as follows:
• Switch the transmitter on. On the transmitter's LC dis-
play the operating display will appear.
• Now press the menu select button SEL (see illustration
1, pos. 4) 1 x.
On the top left on the display MDL appears and instead
of the operating voltage, the name of the model memory
is displayed with 3 letters and/or numbers (eg "FD1").
• With the two setting buttons (see illustration 1, pos. 6)
you can now select any memory from 0-9.
• The selected model memory is automatically called
when turning on and remains active until you select a
different model memory in this menu.
MDL
MDL
N0.
V
N0.
N0.
Illustration 7
49