Reely 23 15 52 Bedienungsanleitung Seite 50

• If you turn the steering wheel on the transmitter (see
illustration 1, pos. 2) left (L) and hold it in that position,
the direction display "LF" and the presently set EPA value
will appear.
• With the two setting buttons (see illustration 1, pos. 6)
you can now set the desired value for the left turn.
• Afterwards turn the steering wheel on the transmitter
towards the right, hold it also in that position and set
the desired value for the steering turn to the right.
Doing this, the direction display changes from "LF" to
"RB".
• The value set last is always automatically saved.
Please note:
If the reverse function is active, the direction display "RB" will appear on the display as
soon as you are steering left.
In this case it isn't the left but, as shown on the display, the right steering turn that is
changed electronically.
This is why at this moment, you can see no change of the steering angle from the wheels
that are turned left.
In order to mechanically check this changed value, simply turn until the right limit stop.
At this moment the direction display changes to "LF" and you could now set the steering to
the left.
With the channel shift key (see picture 1, pos. 5) you can now switch to channel 2 (throttle servo) and
set the necessary values according to the same procedure as with channel 1.
52
EPA
LF
EPA
EPA
CH
RB
%
CH
%
CH
RB
%
Illustration 9b