Adjustment Options On Vehicle; A) Track And Inclination; B) Shock Absorbers; C) Damper Plates - Reely 23 15 52 Bedienungsanleitung



13. Adjustment Options on Vehicle

Once you have set the running characteristics of the engine to an optimum, there is the possibility to
optimize the driving behaviour of the model.
However, the explanations of the correlation between chassis set up settings and driving
behaviour are very complex and would go beyond the scope of these instructions. For this
reason, we can only show the setting options provided. For further information we have to
refer you to appropriate specialist magazines as well as comprehensive reference books
on this subject.

a) Track and inclination

Next to the already mentioned centrally adjustable steer-
ing rods (1), the mini combustion buggy is also provided
with two adjustable steering links (2) on the front axle.
With these links and rods the straight run as well as turning
behaviour is adjusted. In addition each wheel is provided
with an adjustable traverse control arm (3) with the help of
which you can separately adjust the inclination of each
wheel.

b) Shock absorbers

The shock absorbers (4) are designed as oil dampened sus-
pensions, which you can fill with oils of different viscosity,
according to needs.
In addition, the fitted damper spring can be set harder in
no time at all, with a few turns of the setting screw (5) and
therefore the spring behaviour can be adjusted.

c) Damper plates

The damper plates (6) on the front and rear axis offer vari-
ous fixing points for the shock absorbers (7), in order to
perfectly adjust the characteristics of the dampers used to
the model.
In addition there are further fixing points available on the
rear damper plates for the top transverse control arm (8).
1
2
3
7
3
5
4
7
6
8
2
3
3
8
Illustration 19
65