Reely 23 15 52 Bedienungsanleitung Seite 57

2. Drive function
• When you want to reduce the factory set value of 100%
for the drive function, actuate the lower of the two dual
rate buttons for drive function (see also illustration 1,
pos. 11).
Underneath the top edge of the display D/R will appear
and on the top right the channel 2 (CH 2) for the drive
function is shown.
• If you hold the button down, the value will be gradually
reduced from 100% to 30%.
Each setting step will be acoustically supported by a
corresponding beeping tone.
If you would like to make the present value bigger, ac-
tuate the top of the two dual rate buttons.
Just as with the limitation of the steering turn, the dual
rate setting also has an effect on the drive function in
both directions at the same time.
• The value set last is always automatically saved.
Warning!
Since the dual rate function for the throttle reduces also the brake action, next to the
maximum speed, it would be a better solution to reduce the EPA value for full throttle
when you want to make the vehicle slower for beginners.
Out tip: Use two of the ten memories for your mini combustion buggy, programming the
"milder" setting in one of the memories.
11
11
D/R
Illustration 16
CH
%
59