Functionality Of The Rotary - Spartherm SENSO S Montage- Und Betriebsanleitung

3.3 FUNCTIONALITY OF THE ROTARY BASE
The installation of the rotary base can only take place with the
exhaust connection described above and must be declared on the
order. The stove can be rotated as a result through 180°, by 90° to
the left and to the right.
In order to be able to rotate e.g. the stove SENSO S, loosen the
adjustment bolts. These are located at the bottom of the cover plate
on the side with the door handle. Now you can rotate the stove into
the desired position. In order to fix the stove in position once more,
retighten the adjustment bolt again.
ROTATION WITH SINO L
The rotary base can only be fitted in combination with a flue gas
connection at the top and this must be specified when placing the
order. The stove can be rotated through 120°, by 60° to the left
and to the right (Fig. 1).
The transport locking device must be removed before connecting
the stove (Fig. 2). This is located on the rear of the stove at the bot-
tom. In order to dismantle the transport locking device, the cylinder
screw must be loosened with Allen key SW 5 (this is included with
the stove) (Fig. 2).
Then remove the transport locking device (Fig. 3).
In order to be able to rotate the stove, turn the locking device to the
right or the left (Fig. 4) and then turn the stove. When the desired
rotary position has been achieved, turn the locking device back to
its original position. This will independently click into place with a
further turning movement.
Fig. 1
60° to the left
Fig. 2
Fig. 3
Fig. 4
GB 34
Normal position 60° to the right
Transport locking device
Cylinder screw M6
Allen key SW 5
Locking device