KKT KOLBE HKW10NVP3 Benutzerhandbuch Seite 259

9.6 Wi-Fi connection
The system provides a Wi-Fi port which can collect system data
from the inverter and transmit it to a monitoring-website by Wi-Fi.
For this purpose, a compatible Wi-Fi stick is required (KKTWS04).
If necessary, contact the customer service.
WiFi sticks provided by KKT Kolbe are compatible.
To connect the stick, proceed as described in the following section.
Connecting the Wi-Fi stick
• Plug the Wi-Fi stick supplied into the communication
port marked "COM" on the right-hand side of the
cable box (1.1).
ATTENTION!
Risk of damage!
Be careful not to turn the casing of the stick
while installing or removing it (1.2) !
• For remote monitoring of the system via smartphone
app, establish the connection between the inverter
and the router, create a user account online
and proceed as described in the section of the same
name.
Pin assignment of the COM port
2.1 1 +5V
2.2 2 GND
2.3 3 RS485-B
2.4 4 RS485-A
Connecting the System
1.1
1.2
2.4 2.1
2.3 2.2
123