KKT KOLBE HKW10NVP3 Benutzerhandbuch Seite 195

Working mode
Use the up/down keys / to select the desired
work mode from the following:
1: Self consume
2: Peak load shifting
3: Battery priority
To confirm your selection and enter the corresponding
settings menu if available (see following sections),
use the enter key .
Note: When PEAK SHIFT mode is selected, the battery
charge and discharge time(s) must be set as described
in the following corresponding section.
After the setup of one of the three modes,
the restart interface will be entered.
Use the escape key
Setting the grid charge
after selecting SELF CONSUME mode
When selecting the SELF CONSUME mode, enable or
disable battery charging from the grid by using the
up/down keys /
following options:
1: Grid charging disable
(The battery can only be charged by the PV system. Ap-
propriately available sunlight is required for this).
2: Grid charging enabling
(The battery is charged up to the MAX SOC with energy
from the public grid.
The time for this and the MAX SOC are to be set
after activation confirmation).
Confirm the selection with the enter key .
To return to the operating mode selection instead,
use the escape key .
to return to the system setting options.
to select the desired one from the
Operation and Setting
−−WORK MODE−−
1: SELF CONSUME
2: PEAK SHIFT
3: BAT PRIORITY
--WORK MODE--
1: SELF CONSUME
2: PEAK SHIFT
CHARGE FROM GRID
3: BAT PRIORITY
1. DISABLE
2. ENABLE
−−CHARGE TIME−−
00:00-23:59
MAX SOC: 100%
59