KKT KOLBE HKW10NVP3 Benutzerhandbuch Seite 182

Notes before Use
Switching off the system
• Operate the start key of the each battery module control
panel, until all LED indicators go out.
• Take off the cable box cover, open the protective flap of
the cable box and switch off the PV switch, the battery
switch and the BACK UP switch.
• Switch off the external mains switch of your house
installation between the ON GRID connection and the
mains.
• If local loads are connected to the BACKUP connection,
switch off AC circuit breaker between the BACK UP con-
nection and the connected loads.
• Switch off the external PV switches of your house instal-
lation?
• Close the cable box protection flap
and refit the cable box cover.
Noteonswitchingoffthebatterystoragemanually:
To manually put all connected battery modules to
sleep, it is necessary to disconnect the power line,
the communication line and the communication line
between the battery storage and the inverter.
46