KKT KOLBE HKW10NVP3 Benutzerhandbuch Seite 198

Operation and Setting
DRM enabling
This option is applicable in Australia and New Zealand only
and can be ignored for other grid standards.
By default, it is disabled.
To change the current setting, use the up/down keys /
to select the desired one of the two options:
1: DRM disabling (Default setting)
2: DRM enabling
Use the enter key
or the escape key
to the system setting options.
EPS enabling (Emergency power supply)
To supply the backup port without power supply from the
public grid (by battery and PV), EPS must be enabled
(default setting).
Note: Also note that the backup circuit breaker (fuse)
must be switched on for this.
However, the EPS option can also be disabled.
Use the up/down keys / to select the corresponding one
of the two options:
1: EPS disabling
2: EPS enabling (Default setting)
Use the enter key
or the escape key
to the system setting options.
62
to confirm your selection
to cancel the process and return
to confirm your selection
to cancel the process and return
−DRM ENABLE−
1. DISABLE
2. ENABLE
−EPS ENABLE−
1. DISABLE
2. ENABLE