KKT KOLBE HKW10NVP3 Benutzerhandbuch Seite 225

Display status of the Wi-Fi stick during normal operation
and a stable network connection
• NET light lights up steadily after switching on the Wi-Fi stick
(Successful connection status with server)
• READY light flashes slowly
(Normal operation of the Wi-Fi stick)
• COM lights up continuously
(Successful connection status with the inverter)
Display status of the Wi-Fi stick during abnormal operation
and troubleshooting
If a problem occurs during operation of the Wi-Fi stick,
follow the instructions given accordingly in the following table.
Note: The table information refers to the respective display status,
min. 2 minutes after switching on.
If this does not solve the problem or the corresponding display status
is not included in the table, please contact our customer service.
Display status
communication
Present
malfunction
Abnormal • Loose connection
between Wi-Fi
with the stick and inverter
inverter
• Mismatched
communication
rate of the inverter
and the Wi-Fi
stick
Remote Monitoring of the System
Possible
causes
• Remove the Wi-Fi
stick, reinstall it
and ensure a stable
connection.
• Check whether the
communication
rate of the inverter
matches that of the
Wi-Fi stick.
• Operate the reset
key for 5 seconds
to restart the Wi-Fi
stick.
Possible
solution
89