KKT KOLBE HKW10NVP3 Benutzerhandbuch Seite 216

Operation and Setting
RS485 address selection (485 ADDRESS)
This option allows you to select the COM interface
for the RS485 port.
Use the up/down keys / to adjust the input value.
The input value should range between 1 and 32.
Use the enter key
or the escape key
to the setting options.
Setting the baud rate / transmission rate
(BAUD RATE > SELECT)
This option allows you to select the baud rate
for the RS485 port.
Note: The necessary GPRS module is not included
in the scope of delivery.
Use the up/down keys / to select
from the following 3 options:
1: 2400 bps
2: 4800 bps
3: 9600 bps
Use the enter key
or the escape key
to the setting options.
Language setting
Use the up/down keys / to select
from the following options:
1: Chinese
2: English
3: Italian
Use the eenter key
or the escape key
to the setting options.
80
to confirm your input
to cancel the process and return
to confirm your selection
to cancel the process and return
to confirm your selection
to cancel the process and return
−−485 ADDRESS−−
INPUT: 1
−−SELECT−−
1: 2400 bps
2: 4800 bps
3: 9600 bps
−−LANGUAGE−−
1: 中文
2: ENGLISH
3: Italia