KKT KOLBE HKW10NVP3 Benutzerhandbuch Seite 204

Operation and Setting
Parameter setting of the battery type lead-acid
(Battery type not included in KKT Power Sets)
Use the up/down keys / to select from the following
battery parameters the one you want to access:
1: Float voltage
2: Equalising charge voltage
3: Battery capacity
4: Battery over voltage protection
To confirm your selection and enter the corresponding
settings menu, use the enter key .
For further setting, use the up/down keys / to adjust
the input values or digits and the enter key
or the escape key
battery type setting.
Setting other selected battery parameters
After selecting, set the individual battery parameters in
each case by adjusting the individual digits of the input
value with the up/down keys / and confirming with the
enter key .
To return to the battery setting options instead,
press the escape key .
Discharge depth (DISC DEPTH)
The input value can be set between 10% and 90%.
Off-griddischargedepth(OFFGRIDDOD)
The input value can be set between 10% and 90%.
This option is used to set the maximum permissible depth
of discharge for off-grid operation.
Example: When the off-grid depth of discharge is set to
90%, the off-grid operation of the inverter is stopped when
the SOC value (state of charge) of the battery is 10% or
less.
68
cancel the process and return to the
to confirm
−−LEAD-ACID−−
1: FLOAT VOLT
2: EQUALT VOLT
3: BAT CAP
4: BAT OVP
−DISC DEPTH−
INPUT: 060
UNIT: %
−OFFGRID DOD−
INPUT: 060
UNIT: %