KKT KOLBE HKW10NVP3 Benutzerhandbuch Seite 193

4.3 User setting
Use the escape key
and proceed as follows.
Setup
Password entry
To access the settings, it is necessary to enter
the user password.
The default password is"00000".
For entering use the up/down keys / to adjust the
input digits one by one and the enter key
the input and to move the cursor forward.
To move the cursor backwards, use the escape key .
Setup options
Use the up/down keys / to select the desired one
of the following options:
1: System setting
2: Battery parameters
3: Grid standard
4: Operating parameters
5: 485 address
6: 485 baud rate (transmission speed)
7: Display language setting
8: LCD backlight
9: Date / time
10: Clear history
11: Password setting
12: Maintenance
13: Reset to factory settings
14: Auto test (only for italian grid standard)
15: CT Self-check
Confirm your selection with the enter key .
To return to the first page of the user setting instead,
use the escape key .
to enter the user settings interface
to confirm
Operation and Setting
−−USER−−
1: SETUP
2: INQUIRE
3: STATISTIC
−−PASSWORD−−
INPUT: XXXXX
−−SETUP−−
1: SYS SETTING
2: BAT SETTING
3: GRID STD
4: RUN SETTING
5: 485 ADDRESS
6: BAUD RATE
7: LANGUAGE
8: BACKLIGHT
9: DATE/TIME
10: CLEAR REC
11: PASSWORD
12: MAINTENANCE
13: FCTRY RESET
14: AUTO TEST
15: CT SELF-CHECK
57