KKT KOLBE HKW10NVP3 Benutzerhandbuch Seite 194

Operation and Setting
System Setting
Use the up/down keys / to select the one you want
to access from the following system parameters:
1: Working mode
2: PV input type
3: Zero export / Reflux (RückflussRever/AntiReverse)
4: DRM enabling
5: EPS enabling
6: Remote control enabling
7: Start delay / Start time
8: CFI SPI control
9: GFCICHK enabling
10: DOD enabling
11: Generator enabling
12: CT or meter
13: AC couple enabling
To confirm your selection and enter the corresponding
settings menu, use the enter key .
To return to the setup options instead,
use the escape key .
58
−−SYS SETTING−−
1: WORK MODE
2: PV INPUT
3: ZERO EXPORT
4: DRM ENABLE
5: EPS ENABLE
6: REMOTE CTRL
7: START DELAY
8: CFI SPI CTRL
9: GFCICHK ENB
10: DOD ENABLE
11: GENERATOR
12: CT OR METER
13: AC COUPLE