KKT KOLBE HKW10NVP3 Benutzerhandbuch Seite 159

• If the original packaging of other components is no longer
available, use similar packagings and proceed as follows:
• Secure all loose / detachable parts so that they cannot touch
each other.
• Take appropriate protective measures if necessary so that
so that impact effects are avoided.
• Ensure a horizontal position during transport
and when putting down.
Storage instructions
If you need to store the system for a certain period of time,
observe the following instructions to avoid damage:
• Pack each system component together with desiccant bags
if possible in the respective original carton or similar packaging
and seal it with adhesive tape.
• Choose a dry, well ventilated and clean storage place,
away from chemically aggressive or corrosive substances,
gases and other substances.
• Make sure to keep it in an upright position.
• Do not load the packaging.
• Only store the components for as long as absolutely necessary.
• Check the components regularly for visible damage
during the storage period
and replace the packaging if necessary.
Further notes and symbols
23