KKT KOLBE HKW10NVP3 Benutzerhandbuch Seite 214

Operation and Setting
Over-voltage (OVER VOLT), under -voltage (UNDER VOLT),
over-frequency (OVER FREQ) and under-frequency
(UNDER FREQ)
(If necessary, after selecting the corresponding run setting
option over/under voltage / frequency; option selection
with up/down keys / , confirmation and calling up the
corresponding settings menu with the enter key
1: Enabling/disabling of the inverter's power drop when
the respective limit value is exceeded/fallen below
2: Setting the exact voltage or frequency value for the
start of the power drop
To return to the run setting options, use the escape key .
(If necessary, after selecting the 1st option in each case;
option selection with up/down keys / ):
1: Disabling the inverter's power drop when the respective
limit value is exceeded/fallen below
2: Enabling the inverter's power drop when the respective
limit value is exceeded/fallen below
(or
after selecting the 2nd option in each case;
adjustment of the input value for setting the exact voltage
or frequency value for the start of the power drop
with up/down keys / ,
Confirmation with the enter key
To cancel the process and return to the respective
previous menu, press the escape key .
78
):
)
−−OVER VOLT−−
1: ENABLE
−−UNDER VOLT−−
2: VOLT
1: ENABLE
−−OVER FREQ−−
2: VOLT
1: ENABLE
−−UNDER FREQ−−
2: VOLT
1: ENABLE
2: FREQ
−−OVER VOLT−−
1: ENABLE
−−UNDER VOLT−−
2: VOLT
1: ENABLE
−−OVER FREQ−−
2: VOLT
1: ENABLE
−−UNDER FREQ−−
2: VOLT
1: DISABLE
2: ENABLE