Technical Description; Description Of The Device; Connecting The Inverter - Dometic SI 102 Bedienungsanleitung

PocketPower SI102
5

Technical description

The device has a compact design for portable use. The heat generated during operation is
dissipated by a fan inside the device.
5.1

Description of the device

I
NOTE
The version for continental Europe is pictured.
No. in
fig. 1, page 3
1
2
3
4
5
6

Connecting the inverter

A
NOTICE!
• The cable between the battery and the inverter may not exceed a maximum length
of 2 m.
• Make sure the plug (fig. 1 4, page 3) is firmly connected to the vehicle socket. If
the connection is loose, the plug may heat up and cause the inverter to malfunction.
• Do not operate any connected power consuming device while driving the vehicle.
Only operate device when vehicle is stationary.
I
NOTE
If you connect the device to the cigarette lighter, remember that the ignition must be
turned on to supply it with power.
➤ Fasten the inverter as follows (fig. 2, page 3):
– Screw the rail to the floor.
– Push the inverter onto the rail.
➤ Insert the plug into a 12 V cigarette lighter socket or into a 12 V vehicle socket.
The middle pin (fig. 1 3, page 3) of the plug must be connected to the positive (+) wire and
the two side brackets (fig. 1 2, page 3) of the plug must be connected to the negative (–)
wire.
EN
Description
Status LED blue
Negative contact
Positive contact
230 Vw output
USB charger connection
Technical description
7