System Restoration (Recovery) - HBM QUANTUM X Bedienungsanleitung

CX22-W
A3169-5.0_en/de
Important
Store the password safely after changing it. If you lose it
you will need to restore the system to obtain access to
the CX22-W again.
The Info tab contains information about the CX22-W
hardware (ID), the device serial number and the firmware
version.

13.2 System restoration (Recovery)

If you have made changes to the system leading to the
system becoming inoperable, you can restore the
delivery condition of the system. Neither the data stored
on the removable CF card nor partition D: of the internal
memory with the catman
overwritten. You will need a specially prepared bootable
USB memory stick, a keyboard and, where possible, a
(digital) monitor that you can connect directly to the
CX22-W (DVI output) in order to restore the system. The
Recovery file you need is available from the HBM
support site on the Internet at
http://www.hbm.com/support
QuantumX.
Important
During recovery, Partition C of the internal memory will
be deleted and rewritten. Make sure that the CX22-W
has a power supply during the entire recovery process.

EASY defaults will be
and DAQ systems ->
79