System Settings, Update And Recovery; Changing System Settings (Settings) - HBM QUANTUM X Bedienungsanleitung

13

System settings, update and recovery

78

13.1 Changing system settings (Settings)

Important
All changes in the Settings dialog are only permanently
saved and active the next time you switch on, if you click
on Commit changes and reboot in the start screen
after making any changes.
The following settings can be changed:
S Device name (CX22-W name, General tab)
This name is displayed, e.g., in the network.
S Password (Remote access password tab)
The password is required for registration (Log On).

S Run catman
(Launch DAQ software (catman
startup, General tab)
Automatically starts catman
system is operational. See also Chapter 11 on Page
70.
S The language version of catman
software language, General tab)
Select EN for the English interface, DE for the
German interface and FR for the French version of

catman EASY.
In the start screen (CX22 Start screen), click on Settings
and go to the appropriate tab to change the settings.
EASY after switching on the CX22-W


EASY) at
AP as soon as the

EASY (DAQ
A3169-5.0_en/de
CX22-W