56
7.7
Using Ethernet and WLAN in parallel
With the CX22-W data recorder, you can connect
modules via Ethernet and also connect your PC to the
CX22-W via Ethernet. But you can also connect the
modules via Ethernet, and your PC to the CX22-W via
WLAN. The following combinations are possible, in
addition to connecting the modules via FireWire:
1. Connect PC to CX22-W via Ethernet, connect
modules via the WLAN hub.
2. Connect PC with CX22-W via Ethernet, also connect
modules via Ethernet (switch or hub required).
3. Connect PC with CX22-W via WLAN (Adhoc also
possible), connect modules via Ethernet (switch or
hub required).
4. Integrate CX22-W in the WLAN network, connect PC
(and modules) via the (Ethernet) network.
CX22-W
A3169-5.0_en/de