HBM QUANTUM X Bedienungsanleitung Seite 35

CX22-W
A3169-5.0_en/de
11. If Windows queries whether a connection to the
remote computer should be set up, confirm the
connection. We recommend activating the option Do
not ask about connection to this computer again
(see Fig. 7.2 on Page 32). Depending on the
configuration of your Windows operating system,
another query as to whether the connection should be
set up may be displayed (identity of the remote
computer). If necessary, activate the option to prevent
the query (see Fig. 7.3 on Page 32).
The connection with the CX22-W data recorder will
now be implemented and you must register with the
device (Windows login dialog). Enter HBMCX22 as
the User name and hbm as the Password. The text
for the Password must be in lower case.
Important
The IP address and subnet mask or the DHCP setting
are not yet saved. In the start screen, click on Commit
changes and reboot to permanently save the new
settings. The CX22-W is then rebooted, you must
therefore set up the connection again after the restart.
Wait approx. 1 minute until the CX22-W has rebooted
before clicking on Remote connect using LAN.
35