Preparing The Pc For Connection Via An Adhoc Network - HBM QUANTUM X Bedienungsanleitung

CX22-W
A3169-5.0_en/de
16. Click on Commit changes and reboot to
permanently save the new settings.
Even after the CX22-W is switched off, the WLAN
connection will be automatically restored when a PC that
wants to connect to the network is within range (the
name given under 5. is displayed on the PC).
7.3.5 Preparing the PC for connection via an Adhoc
network
1. Start the PC from where the connection is to be set
up.
2. Call up the Network Connections window via the
Windows Start menu and Settings.
3. Right-click on "Wireless Network Connection" and
select Properties.
4. Go to the Wireless Networks tab.
5. Set up the network for the CX22-W: Click on Add and
enter a name for the network in the following dialog:
Network name (SSID): CX22-W.
6. In the Association tab, activate the Connect even if
network is not broadcasting option.
7. Activate the option This is a computer-to-computer
network (ad-hoc); wireless access points are not
used.
8. We recommend setting up encryption for the network,
even if only the less secure WEP is possible for
Adhoc networks: Enter Open for Network
authentication and WEP for Data encryption.
9. Enter the Network key that you assigned to the
CX22-W.
45