Preparing The Cx22-W For An Adhoc Network - HBM QUANTUM X Bedienungsanleitung

CX22-W
A3169-5.0_en/de
4. Select the CX22-W in the top list.
5. Click on Remote connect using WLAN.
6. If Windows queries whether a connection to the
remote computer should be set up, confirm the
connection. We recommend activating the option Do
not ask about connection to this computer again
(see Fig. 7.2 on Page 32). Depending on the
configuration of your Windows operating system,
another query as to whether the connection should be
set up may be displayed (identity of the remote
computer). If necessary, activate the option to prevent
the query (see Fig. 7.3 on Page 32).
The connection with the CX22-W data recorder will
now be implemented and you must register with the
device (Windows login dialog). Enter HBMCX22 as
the User name and hbm as the Password. The text
for the Password must be in lower case.
7.3.4

Preparing the CX22-W for an Adhoc network

1. Activate Adhoc support in the Advanced tab: Adhoc
support 802.11n: Enable.
2. Exit the dialog with OK.
3. Call the first dialog again: Right-click on "Wireless
Network Connection" and select Properties.
4. Go to the Wireless Networks tab.
5. Create a network if the "CX22" network has been
deleted: Click on Add and enter a name for the
network in the following dialog: Network name
(SSID): CX22-W.
6. Otherwise, select the "CX22" network and click on
Properties.
41