HBM QUANTUM X Bedienungsanleitung Seite 81

CX22-W
A3169-5.0_en/de
If the USB memory stick has an LED, this will show
that data transmission is taking place. A special
program is started to implement the recovery
procedure.
10. If a monitor is connected, click in the next dialog on
Recovery. Otherwise, wait approx. 3 minutes and
then press the return key.
The actual recovery process takes approx. 12
minutes, but is dependent on the data transmission
speed of your USB memory stick.
11. If a monitor is connected, remove the USB memory
stick as soon as the message indicating that recovery
was successful appears ("... successfully recovered").
Otherwise wait another 2 to 5 minutes (depending on
the speed of your USB memory stick).
12.In the next dialog, click on Reboot or press the return
key.
The CX22-W is usually restarted twice and is then ready
for operation again. If the second start does not occur
automatically, do not implement a new start (click on No
following the query "Do you want to restart your computer
now?"), instead click on Commit changes and reboot in
the start screen.
Important
After recovery, all the device drivers or programs that
you installed yourself are deleted. So the device drivers
or additional programs have to be installed again.
You also have to repeat any settings you made for IP
address, language or password that differ from the HBM
default settings.
81