Configuring Measurement With Catman; General Default Settings, Data Storage And Directories - HBM QUANTUM X Bedienungsanleitung

10

Configuring measurement with catman

60
Launch catman
start screen of the CX22-W data recorder. The default
language for catman
select German or French via Settings in the start
screen, see Section 13.1 on Page 78.
Tip
For detailed information about using catman
[
the catman EASY online Help.
Please also note HBM's catman
(www.hbm.com
10.1 General default settings, data storage
and directories
Important
We recommend that all the measurement data, as well
as the temporary files, are written to the removable CF
card (drive E:). This is already the case at the time of
delivery and after a recovery. This prevents premature
failure of the internal CF card as a result of too many
write operations.
You should also consider whether additional folders
should be specified as default settings, and how to
proceed with the sensor database.

EASY via Start DAQ software in the

EASY is English, but you can also
-> Seminars).
[
EASY
[
EASY, see
[
seminar program
A3169-5.0_en/de
CX22-W