System Settings, Update And Restoration; Changing System Settings (Settings); System Restoration (Recovery) - HBM QuantumX CX22-W Bedienungsanleitung

QuantumX Data Recorder CX22‐W
11

System settings, update and restoration

11.1 Changing system settings (Settings)

Important
All changes in the Settings dialog are only permanently saved and active after
the next switch on if you click on Commit changes and reboot in the start
screen after making any changes.
The following settings can be changed:
•
Device name (CX22‐W name, General tab)
This name is displayed, e.g. in the network.
•
Password (Remote access password tab)
The password is required for registration (Log On).
®
•
Start catman
(catmanAP) at startup, General tab)
Automatically starts catman
See also Chapter 9 on Page 33.
•
The language version in catman
tab)
Select EN for the English interface, DE for the German interface and FR
for the French version of catman
In the start screen, click on Settings and go to the appropriate tab to change
the settings.
Important
Store the password safely after changing it. If you lose it you will need to
restore the system to obtain access to the CX22‐W again.
The Info tab contains information about the CX22 hardware and firmware.
Changes are not possible here.

11.2 System restoration (Recovery)

If you have made changes to the system leading to the system becoming
inoperable, you can restore the delivery condition of the system. Neither the
data saved to the CF card nor the partition D of the internal memory contain­
A3169-1.0 en/de
AP after switching on the CX22‐W (Launch DAQ software
®
AP as soon as the system is operational.
®
AP (DAQ software language, General
®
AP.
39
HBM