Connecting The Cx22-W And Pc Via A Network - HBM QUANTUM X Bedienungsanleitung

CX22-W
A3169-5.0_en/de
The connection with the CX22-W data recorder will now
be implemented and you must register with the device
(Windows login dialog). Enter HBMCX22 as the User
name and hbm as the Password. The text for the
Password must be in lower case.
Important
The IP address and subnet mask are not yet saved. In
the start screen, click on Commit changes and reboot
to permanently save the new settings. The CX22-W is
then rebooted, you must therefore set up the connection
again after the restart. (Wait approx. 1 minute until the
CX22-W has rebooted before clicking on Remote
connect using LAN.)
Example for IP address and subnet mask
The IP address of the PC is 169.254.27.81, the subnet
mask is 255.255.0.0.
Enter 169.254.27.254 as the IP address and 255.255.0.0
as the subnet mask.
7.2 Connecting the CX22-W and PC via a
network
The settings for the CX22-W data recorder also depend
in this case on your network configuration. Please
contact your network administrator to obtain the correct
settings.
1. Connect the CX22-W with your network via an
Ethernet cable, category CAT5 or higher.
2. Install the "QuantumX Data Recorder Assistant"
program from the QuantumX System CD.
33