HBM QUANTUM X Bedienungsanleitung Seite 10

CX22-W
When the modules are working in a network, these
networks must be designed in such a way that
malfunctions in individual nodes can be detected and
shut down.
Safety precautions must be taken both in terms of
hardware and software, so that a line break or other
interruptions to signal transmission, such as via the bus
interfaces, do not cause undefined states or loss of data
in the automation device.
Conversions and modifications
The module must not be modified from the design or
safety engineering point of view except with our express
agreement. Any modification shall exclude all liability on
our part for any resultant damage.
In particular, any repair or soldering work on
motherboards (replacement of components) is prohibited.
When exchanging complete modules, use only original
parts from HBM.
The module is delivered from the factory with a fixed
hardware and software configuration. Changes can only
be made within the possibilities documented in the
manuals.
Qualified personnel
This device is only to be installed and used by
qualified personnel strictly in accordance with the
specifications and with the safety rules and
regulations which follow.
Qualified persons means persons entrusted with the
installation, fitting, commissioning and operation of the
product who possess the appropriate qualifications for
their function.
10 A3169-5.0_en/de