HBM QUANTUM X Bedienungsanleitung Seite 31

CX22-W
A3169-5.0_en/de
addresses for both devices. In this case, you have
two options: You can either change the PC address
(Windows control panel) or the address of the
CX22-W. The latter is described below.
7. Select the CX22-W in the top list.
8. In the TCP/IP Settings for CX22-W field, click on
LAN and enter the required IP address and subnet
mask or select Use DHCP.
An address and subnet mask that lie within the
address range of your PC are automatically proposed,
you can however change this proposal. Enter an IP
address in which the first three digit groups match the
digit groups of the PC and only the last digit group
contains a different number between 1 and 254. The
last digit group must not match the digit group in the
PC! Also see the example below.
9. Click on Apply and wait until the new address and
are shown at the top. The symbol indicates that a
connection is possible.
QuantumX are in different subnets. In these cases, a
connection is not always possible (depending on the
network settings).
10. Select the CX22-W again in the top list and then click
on Remote connect using LAN.
11. If Windows queries whether a connection to the
remote computer should be set up, set up the
connection (Fig. 7.2). We recommend activating the
option Do not ask about connection to this
computer again.
is displayed if the PC and
31