The Cx22-W Data Recorder Start Screen - HBM QUANTUM X Bedienungsanleitung

9

The CX22-W data recorder start screen

58
In the CX22-W Start screen, you can:
1. Launch the catman
software.
Also refer to Chapter 11 for automatic start.
2. Change important CX22-W settings: Settings.
You can use this to change e.g. the device name
(HBMCX22) and password, as well as the catman
EASY language. The Info tab contains information
about the CX22-W hardware (ID), the device serial
number and the firmware version. Also see Section
13.1 on page 78.
3. Permanently store configuration changes: Commit
changes and reboot.
You must always click on this button if you have
implemented any changes via the Settings button or
in the (Windows) system. This temporarily deactivates
the EWF function and the changes made are
permanently committed. Also see Section 13.6 on
page 84.
4. Terminate the remote desktop connection: Close
remote connection.
You can also terminate the connection by closing the
remote desktop window.
5. Switch to the system level (Windows): Exit to
Windows.
This is necessary, e.g. when you want to activate the
CX22-W WLAN. Also see Section 7.3 on Page 36.
6. Shut down the CX22-W data recorder: Shut down.

EASY program: Start DAQ
CX22-W

A3169-5.0_en/de