HBM QUANTUM X Bedienungsanleitung Seite 59

CX22-W
A3169-5.0_en/de
This switches off the CX22-W. Interrupt the power
supply for approx. 5 seconds to switch it back on
again.
7. Call up the directory with the QuantumX system
documentation: Help.
8. Call up the default directory with the measurement
data: Data.
This opens the directory specified in Settings on the
General tab (default setting E:\Data). The default
setting is for this directory to be enabled for access
via the network (enable name "External CF-Card
data").
Recalling the start screen
If you have used Exit to Windows to exit the start
screen, you can recall it via „CX22-W Start screen" (on
the CX22-W desktop). The link starts the CX22Shell.exe
program.
59