HBM QUANTUM X Bedienungsanleitung Seite 80

80
Tip
Restoring the system with the latest software is
equivalent to a system update.
Procedure
1. Connect a bootable USB memory stick with at least 1
GByte capacity to your PC.
The USB memory stick will be reformatted, i.e. all
data on the stick will be lost. Create a backup of your
data beforehand if necessary.
2. Start the program
"CX22-W_Recovery_Setup_Vx.x.x.exe". (The number
identifies the program version and can vary.)
3. Follow the instructions of the Setup program.
4. After the USB memory stick has been written to, click
on Finish in the last dialog and eject the USB
memory stick via Windows.
5. Switch off the CX22-W and connect the following
components from left to right in USB sockets : the
USB memory stick, keyboard and mouse (optional).
The monitor can be connected via DV1.
6. Switch on the CX22-W.
7. Wait for the beep sounds of the CX22-W during
booting and then press F11 several times (four to five
times within 10 seconds is sufficient).
8. If a monitor is connected, the boot menu will appear,
otherwise wait for another 30 seconds.
9. Press the down arrow key once and then the return
key. This selects the boot medium (boot device) on
the USB connection.
CX22-W
A3169-5.0_en/de